 |
A solid and well finished industrial planer thicknesser with cast iron beds, and a long tilting fence which can be positioned at any point across the table. The 4 knife cutterblock is powered by a 3hp motor and is capable of a cut up to 5mm deep in a single pass. to gain better visibility and access for thicknessing, both of the planing beds are hinged and swing out of the way. a dust hood / cutter gaurd is then swung into position. the feed roller drive can be disengaged when planing to save motor power and general wear. Supplied with 4 knives100mm dust extraction outlet and cable. please note a 16 amp electricity supply is required to run this machine. Specification: surfacing width: 305mm. length of surfacing tables: 1600mm. maximum depth of cut: 5mm. fence tilt: 0-45. thicknessing capacity: 230mm. length of thicknessing table: 750mm. table height: 856mm. number of knives: 4. feed speed: 5.8m/min. motor (induction): 2200w240v1ph. dimensions (wxdxh) 1600mm x 1000mm x 1020mm. weight: 350kg. rating: industrial. More...
DIY Tools's price: £1295.00
If you've arrived here via a search engine and don't see exactly the results
you expected, please search again directly using our DIY search box.
|
![[Go to website navigation]](../../images/skipnav.gif "Go to website navigation"){kind=small}