Back to DIY Search > Search > c

A roller support stand with a 15" chromed roller adjustable in height to suit any freestanding or bench top machinery. the folding design means it can easily be stored away when not in use or conveniently transported to site. Supplied fully assembled with rubber feet. Roller width: 380mm. height adjustment: 710mm - 110mm. column diameter: 32mm. max support: 50kg. dimensions (wxdxh): 460mm x 490mm x 1100mm. weight: 5 kg. rating: diy/light trade.    More...

A ball roller support stand with 9 individual chromed ball rollers with adjustable height to suit any freestanding or bench top machinery. the folding design means it can easily be stored away when not in use or conveniently transported to site. Ball rollers are particularly useful when working with sheet material and can move in any direction. supplied fully assembled with rubber feet. Height adjustment: 710mm - 1100mm. column diameter 32mm. maximum support: 50kg. dimensions (wxdxh): 460mm x 490mm x 1100mm. rating: diy / light trade.    More...

A compact and lightweight design bench top planer, or jointer if you prefer, ideal for anyone needing to move it frequently for storage. the precision ground aluminium tables and tilting fence ensure an accurate smooth finish in timber up to 6" wide. The quality of the finish is further improved by the addition of a variable speed cutterblock all housed inside a tough impact resistant plastic casing. Supplied with disposable, reversible knives, cutter guard, 58mm extraction outlet, cable and plug. our 100/58rc reducing cone can be used to connect to a 100mm diameter hose extration system. Motor (carbon brush): 1200w. maximum planing width: 155mm. maximum cutting depth: 2.5mm. fence tilt: 0-45. dimensions (wxdxh): 780mm x 350mm x 330mm: weight 13kg. rating: diy. Planing capacity * variable speed for optimum finishing * maximum cut 2.5mm * precision ground aluminium tables * adjustable tilting fence * lightweight for convenient storage.    More...

* 12" thicknessing width * 6" timber height * easy to adjust thicknessing scale * folding tables for compact storage * built in carry handles for increased portability * optional floorstand available. A compact thicknesser which will plane and dimension any timber up to 12" x 6" in size. thicknessing height is quickly set using a large adjusting handle and reading off a scale marked in both metric and imperial measurements. The timber is passed through the cutter by two rubber coated drive rollers leaving a smooth unmarked finish. when not in use the infeed and outfeed tables fold up to leave a compact unit for convenient storage or an easily portable unit with built-in carrying handles. Another nice feature is the addition of two chrome rollers on top of the machine, helpful when handling long timbers back over to make a second pass through the thicknesser. supplied with carrying handles, rubber feet, cable and plug. Maximum timber width: 318mm. maximum timber height: 153mm. motor (carbon brush): 1500w. maximum depth of cut: 3mm. feed rate: 8m/min. number of knives: 2. no-load speed: 8000rpm. cuts per minute: 16,000. dimensions (wxdxh): 550mm x 700mm x 470mm. weight: 30kg. rating: diy.    More...

* 12" thicknessing width * 6" timber height * easy to adjust thicknessing scale * folding tables for compact storage * built in carry handles for increased portability. A compact thicknesser which will plane and dimension any timber up to 12" x 6" in size. thicknessing height is quickly set using a large adjusting handle and reading off a scale marked in both metric and imperial measurements. The timber is passed through the cutter by two rubber coated drive rollers leaving a smooth unmarked finish. when not in use the infeed and outfeed tables fold up to leave a compact unit for convenient storage or an easily portable unit with built-in carrying handles. Another nice feature is the addition of two chrome rollers on top of the machine, helpful when handling long timbers back over to make a second pass through the thicknesser. supplied with carrying handles, rubber feet, cable and plug. Maximum timber width: 318mm. maximum timber height: 153mm. motor (carbon brush): 1500w. maximum depth of cut: 3mm. feed rate: 8m/min. number of knives: 2. no-load speed: 8000rpm. cuts per minute: 16,000. dimensions (wxdxh): 550mm x 700mm x 470mm. weight: 30kg. rating: diy.    More...

A 10" x 6" planer thicknesser with excellent finishing results and a price tag bringing it within reach of the home workshop. The surfacing beds are manufactured from cast aluminium with extrusions for the fence and cutter guard. a quick action clamp adjusts the guard for varying widths of timber and a finger pressure is fitted to the end to hold the work piece against the fence during edge planing operations. the bridge guard can also be quickly adjusted vertically using a hand lever to give the correct height when surface planing. For thicknessing operations the outfeed table is removed to give better access and a hinged guard, which doubles as a chip collector, swings into place over the cutterblock. the thicknessing bed, supported by four columns, has a steel cover fitted to provide a tougher, longer lasting surface and can be set anywhere up to a depth of 150mm. When timber is placed on the bed, drive rollers feed it past the cutter at 5 metres per minute reducing the thickness by upto 3mm each pass. if an extractor is to be used the dust hood can be fitted over the cutter guard. Supplied with reversible planer knives, cabinet floorstand, 100mm dust extraction outlet, micro switches to detect guards are correctly positioned before use, cable and plug. Surfacing width: 260mm. length of surfacing tables: 1050mm. maximum depth of cut: 3mm. fence tilt: 0-45. thicknessing capacity: 150mm. length of thicknessing table: 400mm. table height: 830mm. cutter speed: 6500rpm. feed speed: 5m/min. motor: 1800w. dimensions (wxdxh): 1070mm x 700mm x 940mm. weight: 60kg. rating: diy.    More...

A solid and well finished industrial planer thicknesser with cast iron beds, and a long tilting fence which can be positioned at any point across the table. The 4 knife cutterblock is powered by a 3hp motor and is capable of a cut up to 5mm deep in a single pass. to gain better visibility and access for thicknessing, both of the planing beds are hinged and swing out of the way. a dust hood / cutter gaurd is then swung into position. the feed roller drive can be disengaged when planing to save motor power and general wear. Supplied with 4 knives, 100mm dust extraction outlet and cable. please note a 16 amp electricity supply is required to run this machine. Specification: surfacing width: 305mm. length of surfacing tables: 1600mm. maximum depth of cut: 5mm. fence tilt: 0-45. thicknessing capacity: 230mm. length of thicknessing table: 750mm. table height: 856mm. number of knives: 4. feed speed: 5.8m/min. motor (induction): 2200w, 240v, 1ph. dimensions (wxdxh) 1600mm x 1000mm x 1020mm. weight: 350kg. rating: industrial.    More...

A new compact and portable planer thicknesser which is light enough to move off the bench when not in use and yet tough enough to produce 6" x 4" timber into flat and dimensioned pieces. The planning beds are precision ground aluminium and the guide fence is rigid steel which can be tilted and locked at any angle up to 45 degrees when required. the steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the cutter. the dust hood is particularly good, fitting on top of the thicknessing bed during planing operations and then moved over the top when thicknessing. a location censor detects that the dust hood has been correctly fitted before allowing the motor to run. Supplied with re-grindable knives, 100mm diameter dust extraction outlet, blade setting tool, cable and plug. Specification: surfacing width: 152mm. length of surfacing tables: 655mm. maximum depth of cut: 3mm. fence tilt: 0-45. thicknessing capacity: 5 - 100mm. length of thicknessing table: 254mm. table height: 355mm. cutter speed: 8000rpm: feed speed: 8m/min. motor (carbon brush): 1500w. dimensions (wxdxh): 700mm x 380mm x 400mm. weight: 24kg. rating: diy.    More...

A free standing table saw, often referred to as a site or contractors saw, with a big cutting capacity and a large table surface area to suit. Powered by a quiet induction motor, the 300mm diameter tct blade is capable of cutting timber over 3" thick. the rip fence is quickly adjusted thanks to the quick release mechanism and is solid when locked thanks to the extrusion which runs along the front of the table. for anyone wanting to connect the saw to an extractor the dust kit provided will collect from above and below the blade from a single outlet. Because of the large size of this machine, and the tendency to use it for panel work, it is often moved around the workshop. we provide lifting handles and wheels so that one person can easily move it. the working table surface is galvanised steel and the other metalwork is a durable powder coated finish to protect it through many years of work. For anyone working with large sheet materials a further extension table 400mm x 800mm can be added to the right hand side of the main table. supplied with 24 tooth tct blade, dust extraction kit with 100mm outlet, lifting handle and wheel kit, cable and plug. Shown with optional side extension table. Table size. 550mm x 1600mm. maximum ripping width. 290mm. blade tilt: 0-45. cutting depth at 90: 84mm. cutting depth at 45: 60mm. blade diameter: 300mm. blade bore: 30mm. table height: 800mm. motor (induction): 1600w. dimensions (wxdxh) 600mm x 1690mm x 1050mm. weight: 60kg.    More...

A free standing table saw, often referred to as a site or contractors saw, with a big cutting capacity and a large table surface area to suit. Powered by a quiet induction motor, the 300mm diameter tct blade is capable of cutting timber over 3" thick. the rip fence is quickly adjusted thanks to the quick release mechanism and is solid when locked thanks to the extrusion which runs along the front of the table. for anyone wanting to connect the saw to an extractor the dust kit provided will collect from above and below the blade from a single outlet. Because of the large size of this machine, and the tendency to use it for panel work, it is often moved around the workshop. we provide lifting handles and wheels so that one person can easily move it. the working table surface is galvanised steel and the other metalwork is a durable powder coated finish to protect it through many years of work. Side extension table. for anyone working with large sheet materials a further extension table 400mm x 800mm can be added to the right hand side of the main table. supplied with 24 tooth tct blade, dust extraction kit with 100mm outlet, lifting handle and wheel kit, cable and plug. Table size. 550mm x 1600mm. maximum ripping width. 290mm. blade tilt: 0-45. cutting depth at 90: 84mm. cutting depth at 45: 60mm. blade diameter: 300mm. blade bore: 30mm. table height: 800mm. motor (induction): 1600w. dimensions (wxdxh) 600mm x 1690mm x 1050mm. weight: 60kg. maximum ripping width (using extensions). 690mm. table size (with extension): 950mm x 1600mm.    More...