Back to DIY Search > Search > d

- compact, well balanced and easy to use circular saw with 62mm depth of cut. - quick and easy depth and angle adjustment. - high torque motor gives durability and power for cutting job site and joinery materials. - pressed steel shoe for strength and durability. - efficient dust extraction port to minimize airborne dust particles when connected to an extractor unit. - gears and drive spindle mounted in a durable cast aluminium housing. - guiding notches at 90 and 45 degrees to give good cut line visibility. - large retraction lever for safe operation of lower guard. Includes : 18 tooth series 30® saw blade, rip fence, blade spanner, heavy duty carrying case. Specifications. Power input: 1150 watts. Power output: 570 watts. No load speed: 5000 rpm. Blade diameter: 184 mm. Blade bore: 16 mm. Bevel capacity: 50 °. Max. depth of cut at 90º: 62 mm. Max. depth of cut at 45º: 45 mm. Weight: 5.1 kg.    More...

Dewalt professional combi hammer with the following features:. Drilling anchor fixing and through holes into concrete and masonry from 18 to 48 mm. Core drilling from 40 to 115 mm. Rotation-stop for demolition applications in brick, masonry and light chasing in concrete. Dewalt hammer philosophy design: protect mechanism from dust impact, dampen the rebound and develop a low vibration mechanism. Floating rear handle. Electronic speed and impact energy control. Lock-on switch for chipping. Brush wear and service indicators. Includes : multi-position side handle, grease, cloth, heavy duty carrying case. Specifications. Power input: 1250 watts. Power output: 840 watts. Load speed: 132-265 rpm. Blows per minute: 1225-2450 bpm. Impact energy: 1.5-13 j. Tool holder: sds-max. Max. drilling capacity [concrete]: 48 mm. Max. drilling capacity [breakthrough bit]: 80 mm. Max. drilling capacity [core bit]: 115 mm. Weight: 7.8 kg. Length: 528 mm. Height: 268 mm.    More...

Dewalt professional combi hammer with the following features:. Drilling anchor fixing and through holes into concrete and masonry from 18 to 48 mm. Core drilling from 40 to 115 mm. Rotation-stop for demolition applications in brick, masonry and light chasing in concrete. Dewalt hammer philosophy design: protect mechanism from dust impact, dampen the rebound and develop a low vibration mechanism. Floating rear handle. Electronic speed and impact energy control. Lock-on switch for chipping. Brush wear and service indicators. Includes : multi-position side handle, grease, cloth, heavy duty carrying case. Specifications. Power input: 1250 watts. Power output: 840 watts. Load speed: 132-265 rpm. Blows per minute: 1225-2450 bpm. Impact energy: 1.5-13 j. Tool holder: sds-max. Max. drilling capacity [concrete]: 48 mm. Max. drilling capacity [breakthrough bit]: 80 mm. Max. drilling capacity [core bit]: 115 mm. Weight: 7.8 kg. Length: 528 mm. Height: 268 mm.    More...

Combination hammer drill with the following features:. Rotation stop, torque control 2 steps clutch, floating rear handle, electronic speed & impact enery control, lock-on switch for chipping and brush wear and service indicators. Specifications:. Voltage: 110 volt. Power input: 1300 watts. Power output: 840 watts. Load speed: 137 - 275 rpm. Blows per minute: 1260 - 250 bpm. Tool holder: sds max. Max drilling capacity concrete: 48mm. Max drilling capacity core bit: 125mm. Standard equipment:. Multi-purpose side handle, grease cloth and heavy-duty carrying case.    More...

Combination hammer drill with the following features:. Rotation stop, torque control 2 steps clutch, floating rear handle, electronic speed & impact enery control, lock-on switch for chipping and brush wear and service indicators. Specifications:. Voltage: 230 volt. Power input: 1300 watts. Power output: 840 watts. Load speed: 137 - 275 rpm. Blows per minute: 1260 - 250 bpm. Tool holder: sds max. Max drilling capacity concrete: 48mm. Max drilling capacity core bit: 125mm. Standard equipment:. Multi-purpose side handle, grease cloth and heavy-duty carrying case.    More...

Dewalt professional sds max combi hammer with the following features:. Heavy duty drilling anchor fixing and through holes into concrete, masonry and stone from 24 to 52 mm. Core drilling from 40 to 150 mm. Demolition application in concrete and stone. Dewalt hammer philosophy: protect mechanism from dust ingress, dampen the rebound and develop a low vibration mechanism. Active vibration control reduces tri-axial vibration by up to 30% according to the physical agents directive 2002/44/ec - hav. Complete torque control. the unique patented 2 steps clutch allowed the user to work with a higher protection level. 1st step: small bit (up to 40mm), 2nd step: higher bit (40 to 52mm) and core bits. Floating rear handle. Electronic speed and impact energy control. Lock-on switch for chipping. Brush wear and service indicators. Includes : multi-position side handle, grease, cloth, heavy duty carrying case. Specifications. Power input: 1500 watts. Power output: 980 watts. Load speed: 125-250 rpm. Blows per minute: 1150-2300 bpm. Impact energy: 3-18 j. Tool holder: sds-max. Max. drilling capacity [concrete]: 52 mm. Max. drilling capacity [breakthrough bit]: 80 mm. Max. drilling capacity [core bit]: 150 mm. Weight: 9.5 kg. Length: 561 mm. Height: 272 mm.    More...

Dewalt professional sds max combi hammer with the following features:. Heavy duty drilling anchor fixing and through holes into concrete, masonry and stone from 24 to 52 mm. Core drilling from 40 to 150 mm. Demolition application in concrete and stone. Dewalt hammer philosophy: protect mechanism from dust ingress, dampen the rebound and develop a low vibration mechanism. Active vibration control reduces tri-axial vibration by up to 30% according to the physical agents directive 2002/44/ec - hav. Complete torque control. the unique patented 2 steps clutch allowed the user to work with a higher protection level. 1st step: small bit (up to 40mm), 2nd step: higher bit (40 to 52mm) and core bits. Floating rear handle. Electronic speed and impact energy control. Lock-on switch for chipping. Brush wear and service indicators. Includes : multi-position side handle, grease, cloth, heavy duty carrying case. Specifications. Power input: 1500 watts. Power output: 980 watts. Load speed: 125-250 rpm. Blows per minute: 1150-2300 bpm. Impact energy: 3-18 j. Tool holder: sds-max. Max. drilling capacity [concrete]: 52 mm. Max. drilling capacity [breakthrough bit]: 80 mm. Max. drilling capacity [core bit]: 150 mm. Weight: 9.5 kg. Length: 561 mm. Height: 272 mm.    More...

Dewalt professional flip over saw with the following features. The next generation of tgs combination saw combines the accuracy of modern mitre saws with the power and capacity of dedicated table saws. Blac motor technology allows table and mitre saw modes to operate at different speeds optimising cutting performance. Integral leg design increasing durability and ease of use. 305mm head provides an increased depth of cut of 155mm. New mitre and bevel adjustment systems ensure high accuracy and simple adjustment. Additional wheels and wheel barrow mode result in the saw being extremely easy to transport around the jobsite. Includes. Series 60® 48 tooth saw blade. Parallel fence, riving knife. Push stick. Mitre dust collector. Table saw guard. Assembly wrench. Specifications. Power input: 2000 watts. Power output: 1700 watts. Blade speed: 4000/3000 rpm. Blade diameter: 305 mm. Blade bore: 30 mm. Bevel capacity: 48 °. Mitre capacity [right/left]: 48/48 °. Cutting capacity at 90°/90° (w x h): 50x155 mm. Cutting capacity at 90°/90° (w x h): 205x63 mm. Cutting capacity at 45°/90° (w x h): 45x155 mm. Cutting capacity at 45°/90° (w x h): 160x35 mm. Cutting capacity at 90°/45° (w x h): 60x110 mm. Cutting capacity at 90°/45° (w x h): 205x50 mm. Max. cutting capacity at 45°/45°: 60x100 mm. Max. cutting capacity [sawbench position 90°/90°]: 0 - 81 mm. Max. cutting capacity [sawbench position 90°/45°]: 0 - 56 mm. Weight: 40 kg.    More...

Dewalt professional flip over saw with the following features. Integrated sight line laser for improved accuracy. The next generation of tgs combination saw combines the accuracy of modern mitre saws with the power and capacity of dedicated table saws. Brushless ac motor technology allows table and mitre saw modes to operate at different speeds optimising cutting performance. Integral leg design increasing durability and ease of use. 305mm head provides an increased depth of cut of 155mm. New mitre and bevel adjustment systems ensure high accuracy and simple adjustment. Additional wheels and wheel barrow mode result in the saw being extremely easy to transport around the jobsite. Robust frame design also incorporates storage area for attachments. Includes series 60® 48 tooth saw blade, parallel fence,riving knife,push stick, mitre dust collector ,table saw guard, assembly wrench. Specifications. Power input: 2000 watts. Power output: 1700 watts. Blade speed: 4000/3000 rpm. Blade diameter: 305 mm. Blade bore: 30 mm. Bevel capacity: 48 °. Mitre capacity [right/left]: 48/48 °. Cutting capacity at 90°/90° (w x h): 50x155 mm. Cutting capacity at 90°/90° (w x h): 205x63 mm. Cutting capacity at 45°/90° (w x h): 45x155 mm. Cutting capacity at 45°/90° (w x h): 160x35 mm. Cutting capacity at 90°/45° (w x h): 60x110 mm. Cutting capacity at 90°/45° (w x h): 205x50 mm. Max. cutting capacity at 45°/45°: 60x100 mm. Max. cutting capacity [sawbench position 90°/90°]: 0 - 81 mm. Max. cutting capacity [sawbench position 90°/45°]: 0 - 56 mm. Weight: 40 kg. Depth: 800 mm. Length: 720 mm. Height: 770 mm.    More...

- combination saw with crosscut and ripping capabilities. - powerful 1500 watt induction motor to meet the needs of the most demanding applications. - lightweight and easily transported. - innovative guard design maximises safety in use. - precision cast aluminium base and table top guarantees high precision cuts in both cutting modes. - slide mechanism incorporated to increase cross cut capacity. - high and stable back fence increases accuracy in all mitre applications. - unique design gives excellent visibility in both rip and mitre modes. - all-metal upper fence with positive cam lock for maximum accuracy. Includes : series 40 csb, push stick, blade wrench, rip fence, table saw blade guard, allen key. Specifications. Power input: 1500 watts. Power output: 1100 watts. Blade speed: 3000 rpm. Blade diameter: 305 mm. Blade bore: 30 mm. Bevel capacity: 45 °. Mitre capacity [right/left]: 60/50 °. Cutting capacity at 90°/90° (w x h): 220 x 90 mm. Cutting capacity at 90°/90° (w x h): 220 x 90 mm. Cutting capacity at 45°/90° (w x h): 155 x 90 mm. Cutting capacity at 45°/90° (w x h): 155x 90 mm. Cutting capacity at 90°/45° (w x h): 220 x 50 mm. Cutting capacity at 90°/45° (w x h): 220 x 50 mm. Max. cutting capacity at 45°/45°: 155 x 50 mm. Max. cutting capacity [sawbench position 90°/90°]: 51 mm. Weight: 26.5 kg. Depth: mm. Length: mm. Height: mm. Max. cutting capacity at 90°/90°: 220x90 mm. Max. depth of cut [saws]: 51 mm. Max. crosscut capacity: 220 mm. Max. ripping capacity [right]: 200 mm. Max. ripping capacity [left]: 220 mm.    More...