Back to DIY Search > Search > d

Pump with 1000w motor for use in areas where a large head height or high pressure is required ie pumping out wells etc. will pump up to 10m deep. thermal overload protection and float switch which automatically turns pump off when water level has dropped. supplied complete with 15m (approx.) bs approved non-rewireable moulded plug and cable. display carton. specification:maximum head height ... 36mmaximum output ... 95l/minmaximum water temperature ... 35°cmaximum particle size ... 4mm dia.motor ... 1000woutput aperture ... 32mm dia. Weight: 8.88kg.    More...

Weight: 0.00kg.    More...

130a 230v arc welder. Multi-purpose machine suitable for the semi-professional and home user.features: • stepless amperage adjustment• thermal overload protection• electrode and earth leads.supplied complete with face mask and combined chipping hammer/wire brush. fitted with a bs approved non-rewireable 3 pin moulded plug and cable. carton packed. specification:output amperage range ... 50 - 130max. input power ... 2.6kwelectrode size ... 1.6 - 3.2mmopen circuit voltage ... 43 - 46vdimensions ... 190 x 210 x 355mm weight ... 14kg.    More...

230v automatic battery charger. For workshop use. fully automatic for continuous adjustment of unsupervised charging. features include led charging status display, ± polarity inversion protection and thermal overload safety protection. insulated copper leads and battery clips. suitable for conventional lead acid, lead calcium, maintenance-free and gel filled batteries. carton packed. specification:charging output ... 12/24vinput-single phase ... 230v accharging steps ... 4fast charge steps ... 2charging current effective ... 30a (12v)av. charging current (en60335.) ... 20a (12v)fuse ... 30a x 1dimensions ... 330 x 210 x 280mmweight ... 9.7kg.    More...

Powerful induction motor supports 1“ mortice facility. back, forth and lateral table movement allows for easy positioning of larger workpieces. fully adjustable work clamps and depth stops allow for accurate morticing. supplied complete with 5/8“ chisel and bit, 19mm, 13/16“ and 1.3/16“ chisel bushes, 16mm chuck and key, work clamp and bs approved non-rewireable 3 pin moulded plug and 2m of cable. display carton. specification:motor .. 370wspeed ... 1500rpmchisel capacity ... 25.4mm (1“)chisel stroke (max.) ... 220mmworkpiece height (max.) ... 220mm (5/8“ chisel)clamping height (max.) ... 200mmchuck capacity ... 16mmfence to chisel centre ... 140mmtable size ... 400 x 150mmbase size ... 300 x 450mm. No-volt switch. Weight: 0.00kg.    More...

To charge the batteries used in the draper cordless drills. 230v ac charging time 1 hour (approx.). display packed. Weight: 1.07kg.    More...

To charge the batteries used in the draper cordless drills. 230v ac charging time 1 hour (approx.). display packed. Weight: 1.08kg.    More...

Features:• variable speed control• two-speed gearbox• 21 position torque control• integral spirit level• keyless chuck• forward and reverse rotation• anti-slip soft grip• 1 hour fast chargersupplied complete with: 2 x screwdriver bits, carrying case with display sleeve, 14.4v battery pack and 230v ac charger (1 hour). specification:drilling capacities:mild steel ... 10mmwood ... 20mmmasonry ... 10mmspeed no load ... 0-330/0-1100rpmchuck capacity ... 10mm (keyless)spindle thread ... 1/2“ x 20unfweight (inc. battery pack) ... 1.6kg. Weight: 1.69kg.    More...

Features:• variable speed control• 17 position torque control• keyless chuck• forward and reverse rotation• anti-slip soft grip• one hour chargersupplied complete with: double-ended screwdriver bit, 6 x screwdriver bits, 6 x hss drill bits, adaptor, carrying case, 18v battery pack(s) and 230v ac charger (1 hour). display packed. specification:drilling capacities:mild steel ... 10mmwood ... 20mmmasonry ... 12mmspeed no load ... 0-900rpmchuck capacity ... 10mm (keyless)spindle thread ... 3/8“ x 24unfweight (inc. battery pack) ... 1.9kg. Weight: 1.32kg.    More...

230v horizontal/vertical metal cutting bandsaw. A versatile three-speed machine offering horizontal and vertical cutting capabilities. designed for use in the maintenance workshop. the 350w motor gives smooth and accurate saw blade transmission through the adjustable ball bearing guides. suppliedcomplete with transport wheels, tool shelf, plastic blade guards and bs safety regulation guard. push button on/off switch and bs approved non-rewireable 3 pin moulded plug and cable. carton packed. specification:cutting capacity ... 114mm round 100 x 150mm rectangularmotor ... 350w induction blade length ... 1638mmvertical table size ... 254 x 250mmheight to bed ... 591mmheight to table ... 851mmspeeds (rpm) ... 3 (65, 95, 165)weight ... 61kg.    More...