Back to DIY Search > Search > s

High quality scart lead with black PVC sheath.    More...

Sheppach basato 3 bandsaw 160mm depth of cut. The scheppach basato 5 bandsaw was awarded the coveted european "machine of the year" award when introduced in 1998. After testing, one trade journal queried, "is the basato the ultimate bandsaw?" scheppach has now incorporated all the basato design features into a smaller machine and added variable speed control. f. Depth of cut 160mm: width of cut 306mm: table size 548 x 400mm. Blade length 2360mm. Image shown with optional floor stand.    More...

Scheppach basato 3 12" bandsaw. 160mm depth of cut. the basato 3 vario including base with wheels incl. free mitre gauge and 3 blades. The scheppach basato 5 bandsaw was awarded the coveted european "machine of the year" award when introduced in 1998. After testing, one trade journal queried, "is the basato the ultimate bandsaw?" scheppach has now incorporated all the basato design features into a smaller machine and added variable speed control. f. Depth of cut 160mm: width of cut 306mm: table size 548 x 400mm. Blade length 2360mm.    More...

Realise your imaginative ideas with a scheppach basato 5-2 bandsaw. so what makes scheppach stand out from the rest? firstly, it is equipped with a solid cast iron table and a deep rip fence which locks positively by means of an eccentric clamp. Fit the optional micro fence attachment giving adjustment to 1/10th mm and you are ready for cutting on line – without wandering – down to wafer thin thickness. with up to 300 mm depth of cut; 440 mm throat capacity; two speeds and a table tilt range from minus 20 to plus 47 degrees, all you need in addition is a little imagination. Standard equipment: stable, torsion resistant steel construction, swivelling cast iron table, ripping fence with magnifying glass, 3-roller sawblade guide top and bottom, band wheels with rubber facing, 2 speeds, suction connector, push stick, assembly tool. Technical data: dimensions (l / w / h): 1,230mm x 800mm x 1,870mm. table size: 640mm x 640mm. table height: 900mm. table tilt adjustment: -20° to 47°. blade wheel ø: 450mm. sawblade length: 3,430mm. sawblade width (min-max): 6-25mm. cutting speed: 460/1200m/min. clearance height: 300mm. clearance width: 440mm. suction connector ø: 100mm. 154kgs. Motor: 230 v /50 hz. input: 2.2kw (3.1hp). output: 1.5kw (2.0hp) speed: 1,400rpm. brake: no. motor protection: yes. switch/plug unit with no-volt release: yes.    More...

Scheppach now introduce the new basato 1 hobby bandsaw. other than variable speed control, this machine offers all the design features of larger basato models. like other basato “family members“ the basato 1 boasts a solid cast iron table which is tiltable to 45° and has precise one hand setting control. Unusual for this size of machine are the top and bottom triple roller precision guides included as standard equipment. a rigid fence system with magnifying glass for precise setting; a cutting capacity of 190 mm x 100 mm; balanced polished wheels with rubber facing; all this and more finally enables everyone to have the joy of working with a basato bandsaw. Stable, torsion resistant steel construction, swivelling cast iron table, ripping fence with magnifying glass, tempered 3-roller precision saw bladeguide top and bottom, bandwheels with rubber facing, balanced and polished suction connector. Cutting capacity 190mmx100mm.triple blade guides above and below the table.    More...

This excellent quality grinder and linisher is an invaluable addition to any workshop. ideal for use with woods, most plastics and non-ferrous metals. The grinder can give rapid sharpening to various types of blades. the powerful induction motor quickly bring the rough and smooth grinding stones to their required operating speed. A coolant tray for cooling heated material is standard. thin motor design allows full access to the grinding wheels.    More...

Sanding deep and wide work pieces, front edges, narrow inner curves, horizontal, vertical, diagonal, with or across the grain; it’s all part of a day’s work with the scheppach bsm 2010 belt sanding machine and the job is completed in no time to your total satisfaction. In vertical sanding mode the 198 mm wide anodised aluminium tables offer more than adequate support and the smoothest surface to work off. the continuous table height adjustment enables you to use the full width of the belt equally which becomes cost effective and economical in use. The most generous sanding surface allows the safe and proficient sanding of larger work pieces and the belt speed of 11 m/sec eliminates the possibility of overheating and discoloration of the wood. Efficient corner sanding. both tables are adjustable from 0 to 45 degrees using small rotating rollers allowing perfect diagonal sanding even on tight inner curves. the standard safety fence allows you to work with small work pieces safely. a handle provides quick and easy adjustment of the bsm 2010 to either horizontal or vertical sanding modes. An optional sturdy floor stand makes it possible to convert the machine from a bench top unit to a floor standing machine. due to the connecting piece for a scheppach extractor unit, the bsm 2010 got the test certificate “wood dust tested”. Standard equipment: folding sanding plate with workpiece fence, height adjustor, swivel length table, swivel cross table, 3 sanding belts, suction connector, assembly tool.    More...

Sanding deep and wide work pieces, front edges, narrow inner curves, horizontal, vertical, diagonal, with or across the grain; it’s all part of a day’s work with the scheppach bsm 2010 belt sanding machine and the job is completed in no time to your total satisfaction. In vertical sanding mode the 198 mm wide anodised aluminium tables offer more than adequate support and the smoothest surface to work off. the continuous table height adjustment enables you to use the full width of the belt equally which becomes cost effective and economical in use. The most generous sanding surface allows the safe and proficient sanding of larger work pieces and the belt speed of 11 m/sec eliminates the possibility of overheating and discoloration of the wood. Efficient corner sanding. both tables are adjustable from 0 to 45 degrees using small rotating rollers allowing perfect diagonal sanding even on tight inner curves. the standard safety fence allows you to work with small work pieces safely. a handle provides quick and easy adjustment of the bsm 2010 to either horizontal or vertical sanding modes. Standard equipment: folding sanding plate with workpiece fence, height adjustor, swivel length table, swivel cross table, 3 sanding belts, suction connector, assembly tool.    More...

Economic belt and disc sanding – the bts900 bench top sander. Belt and disc sanding are combined with the bts900 sander. this is the major benefit with the bts900. belt and disc sanding in one compact unit that can be easily stored when not in use. the belt sanding option can be adjusted vertically through 90 degrees and the sanding table can be mounted for both belt and disc sanding operations. the mitre attachment can be set to any angle up to 45 degrees. The sanding belt can be continuously adjusted from horizontal to vertical. the tilting table can be positioned for both belt and disc sanding operations. the sanding discs are easily attached with the velcro fastening system. Standard equipment: stable, torsion resistant casing, pivoting work table, horizontally and vertically adjustable sanding belt, sanding discs with velcro fastening, sanding belt, sandpaper, suction connector, assembly tool. Dimensions ( l / w / h ) 530 x 410 x 290mm. grinding plate 290mm. table size 159mm x 225mm. table adjustment 45° . sanding belt length/width 915mm/100mm. sanding belt grit size 80. belt speed 7.5rpm. sanding disc speed 2,350rpm.    More...

The capas 2 crosscuts, angles and compound angles, all in one easy stroke of the saw. it gives precise cuts through timber or boards up to a width of 320 mm. it gives a 65 mm depth of cut and cuts angles – left and right – up to 45 deg. Standard equipment. diecast aluminium base and rotary plate, locking positions, workpiece stop, suction connection, tct sawblade, chip collection bag. Cutting height max at 45° - 65mm. cutting height max at 90° - 45mm. cutting width max at 45° - 320mm. Motor 230 v/50 hz. input 1.12 kw (1.52 hp). output 0.65 kw (0.9 hp).    More...