Back to DIY Search > Search > s

From our professional range, machines for economic use - the log splitters. the ox 1, designed primarily for domestic use for logs up to 55 cm in length, excels on account of its safety standards and technical perfection to a professional level. An exceptional high safety standard is - by the two handed operating system. this means that neither hand can leave the “safety zone” whilst splitting is in operation. the splitting wedge slices through even the toughest wood and the two way hydraulic cylinder quickly returns the wedge back to its original upper position. Thicker logs can be split into four pieces using the cross shaped wedge, optional. Standard equipment: stable torsion-resistant steel construction, hydraulic installation with retro-cylinder, two handed safety control with hand guard, continuously adjustable hand-riser, swivel-table with safety clamp, wood holding device, transverses mechanism. Technical details: diameter (l/w/h): 475mm x 870mm x 1000-1650mm. table height: 820mm. working height: 900mm. splitting power: 6 t. cylinder riser: 53.5. riser: 3.7riser: 6.7. hydraulic fluid capacity: 3 litres. maximum wood length: 55cm. weight approx. 90kgs. Drive details: 230 v/50 hz. input: 2.2 kw (3.0 hp). output: 1.94 kw (2.5 hp). motor rated: s1 100%. speed: 2,800rpm. thermal motor protection: yes. switch plug with reverse phase: yes.    More...

From our professional range, machines for economic use - the log splitters. the ox 1, designed primarily for domestic use for logs up to 55 cm in length, excels on account of its safety standards and technical perfection to a professional level. an exceptional high safety standard is - by the two handed operating system. this means that neither hand can leave the “safety zone” whilst splitting is in operation. This means that neither hand can leave the “safety zone” whilst splitting is in operation. the splitting wedge slices through even the toughest wood and the two way hydraulic cylinder quickly returns the wedge back to its original upper position. thicker logs can be split into four pieces using the cross shaped wedge, optional. Standard equipment: stable torsion-resistant steel construction, hydraulic installation with retro-cylinder, two handed safety control with hand guard, continuously adjustable hand-riser, swivel-table with safety clamp, wood holding device, transverses mechanism. Technical details: diameter (l/w/h): 475mm x 870mm x 1000-1650mm. table height: 820mm. working height: 900mm. splitting power: 6t. cylinder riser: 53.5. riser: 3.7. riser: 6.7. hydraulic fluid capacity: 3 litres. maximum wood length: 55cm. weight approx: 90kgs. Drive details: 400 v/50 hz input: 2.0 kw (2.7 hp) output: 1.5 kw (2.0 hp) motor rated: s1 100% speed: 2,800rpm thermal motor protection: yes switch plug with reverse phase: yes.    More...

0.32 kw single-phase speeds 6/8/10/13 m/min, clockwise/anti-clockwise running. 3 rollers.    More...

Correct grinding and honing is an art in and of itself. without training and experience, costly mistakes can be made and expensive tooling ruined. now, all the technique you need for professional results has been ”built in“ the scheppach tiger 2500 wet and dry grinding/honing system. your machine is the ”professional“ – you get perfect grinding every time. Just like old-fashioned grinders, the tiger stone runs slowly in a water trough so that the tool never looses its temper due to overheating. with the special stone containing grains of aluminium oxide, you achieve perfect grinding results much quicker than with any other machine. the grinding stone is also ideal for hss tools. The leather honing wheel removes the burr and gives a perfectly polished cutting edge. it is removable to allow unhindered access to the grindstone when grinding long knives or tools. the powerful motor protected from water splashes by an enclosed housing, is made for continuous operation. Standard equipment: solid, closed sheet-steel casing, powder coated, splash-proof motor and switch, top quality grindstone with grinding grains of aluminium oxide, also for hss tools, removable leather honing wheel, non-skidding support, powerful motor for continuous operation, universal holder for grinding jigs, solid, break-proof water tank of metal, universal jig, angle guide; abrasion paste, 1.75 m long electric cable with shock-proof-plug. Grinding stone size: 250mm x 50mm. grinding stone is top-quality grindstone with grinding grains of aluminium oxide. honing disc ø mm. 200mm x 30mm. ( leather honing wheel).    More...

Just like old-fashioned grinders, the tiger stone runs slowly in a water trough so that the tool never looses its temper due to overheating. with the special stone containing grains of aluminium oxide, you achieve perfect grinding results much quicker than with any other machine. the grinding stone is also ideal for hss tools. The leather honing wheel removes the burr and gives a perfectly polished cutting edge. it is removable to allow unhindered access to the grindstone when grinding long knives or tools. the powerful motor protected from water splashes by an enclosed housing, is made for continuous operation. Standard equipment solid, powder-coated casing, splash-proof motor and switch, top-quality grindstone with grinding grains of aluminium oxide, also for hss tools, removable leather honing wheel, non-skidding support, powerful motor, grinding jig 70, abrasion paste, angle guide, break-proof water tank, 1.75 m long electric cable with splash-proof plug. Grinding stone size: 200mm x 40mm. rotation speed 120rpm.    More...

Portable; versatile; outstanding performance; rigid; and accurate. these sawbenches represent amazing value for money. their generous specificat ion fulfills the need for ripping, crosscutting, angle and compound angle cuts. Of particular importance to the discerning buyer is the rip fence which can be instantly locked and released for appropriate positioning. when locked it is totally rigid. no flexing or wavering under side pressure. the sawbench comes with the saw/motor unit, pre-factory assembled, leaving minimal assembly to the final user. Safety – an integral part of the tku. equipped with an electronic motor brake, the sawblade comes to a standstill with-in seconds. safety is enhanced by the table length extension coming as standard. Standard equipment: ripping fence with fence rail, aluminium table insert, table extension with support leg, extraction hood, suction connector, push stick, assembly tool, tct sawblade, handwheel r and f. Powerful 3hp 2.2kw motor. 85mm cutting depth. rigid and accurate rip fence. sturdy construction.    More...

Ripping fence with fence rail, aluminium table insert, table extension with support leg. Crosscut/mitre gauge, sawblade guard with extraction hood and suction connector. Push stick, push grip and assembly tool included. Tct sawblade. Powerful 3hp/2.2kw motor. 85mm cutting depth. rigid and accurate rip fence. sturdy construction.    More...

With the new ts 2010 circular sawbench, scheppach offers all the versatility of a professional machine in a compact sawbench that is perfect for even the smallest workshop. Big table plate, anodized aluminium profils, sawblade guard, suction hose for top sawblade guard, suction connector for dust free working, precision ripping fence with magnifying glass and angle fence rail, height and angle adjustment with handwheel (patent), poly-v belt drive, tct sawblade, induction motor, push stick, push grip, tool for changing the sawblade. Motor: 220 – 240 v /50 hz input: 1.8kw (2.5hp) output: 1.2kw (1.6hp) speed: 2,800rpm. brake: no. motor protection: yes. switch/plug unit with no-volt release. yes.    More...

Accurate – versatile – portable. ideal for the small workshop or on site. the new scheppach ts 2010 circular sawbench. Big table plate, anodized aluminium profils, sawblade guard, suction hose for top sawblade guard, suction connector for dust free working, precision ripping fence with magnifying glass and angle fence rail, height and angle adjustment with handwheel (patent), poly-v belt drive, tct sawblade, induction motor, push stick, push grip, tool for changing the sawblade. Fine adjustment for the ripping fence comes as standard. Motor 2.5hp induction (1.8kw). blade size 200mm x 30mm bore. depth of cut @ 90° 62mm. depth of cut @ 45° 48mm. width of cut to rip fence 230mm table size 480 x 600mm .    More...

Includes the ts2010 base, sliding table carriage and table with extension. Accurate – versatile – portable. ideal for the small workshop or on site. the new scheppach ts 2010 circular sawbench. Standard equipment: big table plate, anodized aluminium profils, sawblade guard, suction hose for top sawblade guard, suction connector for dust free working, precision ripping fence with magnifying glass and angle fence rail, height and angle adjustment with handwheel (patent), poly-v belt drive, tct sawblade, induction motor, push stick, push grip, tool for changing the sawblade. Sliding table carriage: with precision angle fence, adjustable to 60° left and right, guide rail 950 mm long. Also includes assembly tool and tct sawblade. Motor: 220 – 240 v /50 hzinput: 1.8kw (2.5hp)output: 1.2kw (1.6hp)speed: 2,800rpm brake: no. motor protection: yes. switch/plug unit with no-volt release: yes.    More...